PyroDem’ s aim is to promote the safe use of pyrotechnic blasting throughout the civil engineering and construction industry, develop safe systems of work and provide alternatives to conventional rock and concrete breaking methods. With over 2 decades of experience in the construction industry, we understand the importance of a fast, safe and reliable solution to rock breaking.
Based in central Scotland, we can attend your site at reasonably short notice to carry out feasibility studies, blast, train and demonstrate the power, safety and flexibility of pyrotechnical blasting. Why not "Break with Convention" and explore the future of rock breaking.
The Royex rock breaking system is designed to break rock where conventional explosives are either prohibited by regulation or unsuitable for the task.
The Royex Generation II System is the world's first propellant based rock breaking system to be aligned with a sequential delay-timed initiation system
Deflagration is a rapid high energy release combustion event that propagates through a gas or an explosive material at subsonic speeds, driven by the transfer of heat. Deflagration, or Combustion, is different from detonation, which is supersonic and propagates through shock. Propellant powders have long been used as a rock breaking tool
For more technical information and detail, please visit Royex Rock Breaking Systems.
Breaking oversize rock and secondary blasting over and underground.
Break rock without closing down traffic or rerouting to protect from fly rock. Spare road infrastructure from vibrations.
Break concrete or rock in urban areas and spare sensitive structures and conform to local requirements.
Expanding cellars, removing concrete or similar work where indoor structures must be protected.
The rock breaking cartridges have been haunted by numerous issues in the past. Issues that have not had any serious solutions up until now. We are now proud to introduce the following new features to the rock breaking arena.
Through our new Maxfire igniter series, we can now offer the world’s most powerful RBC igniter with timing capability designed for optimal initiation of the Royex Gen 2 propellant mix.
Fully oxygen balanced and with a density close to one, the Royex Gen 2 propellant mix brings more power than ever seen in a rock breaking cartridge.
To ensure maximum flexibility, the cartridge has been separated from the igniter. The operator can choose from a range of cartridge sizes and range of igniter configurations including pyrotechnical timing.
Through Methodical development and exhaustive trials, we have been able to prove the cost savings and value addition when switching from conventional explosives to Royex in relevant applications.
PyroDem Ltd offer a modular training program, after the initial 1 day basic training module, we offer ad on modules to advance your certification, allowing you to employ the Royex rock breaking system in all areas of blasting and can be tailored to suit your site requirements.
Add on modules will generally take 2 days each and can be done on your site as part of your current contracts/workload. Additional modules will cover blast design, safe systems of work and risk assessing as well as the practical side of Pyrotechnical blasting in your required specialty.
1 day basic training; enabling you to purchase the system and carry our single shot basic blasting in a safe environment such as quarries or remote locations.
The Royex rock breaking system has been developed with safety and efficiency of paramount importance. Royex is highly efficient when properly applied but has minimal impact on the surroundings if accidentally initiated or if exposed to fire or heat.
Since the solid propellant used in the Royex cartridges is a non-detonating compound the Royex cartridge will not explode if accidentally initiated on an open surface or exposed environment. Exhaustive testing has proved that even if a cartridge is accidentally initiated inside a box containing several cartridges the effect is limited to a small fire. No explosion will occur. The system is tested in accordance to the United Nations transport directive and is considered safe to transport and store in facilities with far more lenient requirements than regulated for normal explosives. The UN 1.4s classification also permits the cartridges to be transported by commercial air-cargo without restrictions on volume.
Cartridge diameter (mm) | Explosive weight(gram) | Cartridges per case |
---|---|---|
16* | 5 | 50 |
16* | 10 | 50 |
16* | 15 | 50 |
25 | 15 | 50 |
25 | 25 | 50 |
25 | 50 | 50 |
32 | 25 | 50 |
32 | 50 | 50 |
32 | 75 | 24 |
32 | 100 | 24 |
38 | 50 | 24 |
38 | 100 | 15 |
38 | 150 | 15 |
38 | 200 | 15 |
*Delivered with pre-assembled fusehead igniter
** Available with pre-assembled Maxfire igniter, or without igniter. Cartridge without igniter may either be used as booster cartridge or with a separate electrical or shock tube Maxfire igniter
MARS is our compact, electronic capacitor blasting machine with build in ohm-meter. The machine is charged with aid of built in batteries and is operated by means of two spring loaded switches that short-circuit the capacitors in the rest position. The built in ohm-meter allows the operator to check for short-circuits and resistance. MARS uses a colour coded digital voltage meter to illustrate current battery levels and comes with a built in temperature compensation function. MARS is waterproof and very easy to use.
Since the Royex cartridge propellant is designed to deflagrate rather than to explode, the gas volume expansion is slow. To enable maximum efficiency in short drill hole depths, proper hole confinement is needed and this is supplied by the Royex hole iron. Made of purpose matched steel, the hole iron is applied at the end of the drill hole and ensures that the gas energy is contained and propagates through the rock rather than out of the drill hole. This minimizes the risk of hole blow outs and ensures optimum results, even in drill hole depths as short as 60 cm. The product is especially useful in dimensional stone quarrying where straight cuts are needed and where normally shallow blast holes are used.
The Royex hole iron is made in two sizes, 32 mm and 25 mm for drill hole diameters of 35-40 mm and 28 mm respectively.
With over 2 decades of experience in the construction industry, we understand the importance of a fast, safe and reliable solution to rock breaking